news

Requirements for the application of aluminum skin in decoration

Update:13-08-2021
Summary:

The aluminum skin has a novel structure, light weight, […]

The aluminum skin has a novel structure, light weight, and very strong durability. The elongation of the aluminum plate is very high, because its relative elongation will be 10% higher, and it can also accept high twists and will not break, so Its patience is very strong. It is easy to install and save resources. Everyone knows that the most traditional way to build an exterior wall is to use cement, sand, water and other materials. roller coating aluminium sheet There are a lot of materials used, and a lot of waste will be generated after withdrawal, which causes a lot of waste. Construction waste, using this kind of thermal insulation aluminum skin is not only very comfortable, but also convenient and environmentally friendly.
The decoration of aluminum skin is very strong. It is very different from other insulation board mechanisms. It can directly bond the rigid polyurethane with geothermal conductivity and high insulation function to the back of the formed aluminum board through infusion and foaming very firmly. The following editor will take you to analyze the requirements of aluminum skin for decoration. I hope everyone can understand the aluminum skin.
1. The variety, quality, color and shape of the aluminum skin should meet the design requirements.
2. The installation and connection of the aluminum skin is suitable for cored aluminum rivets with a pitch of 120mm.
3. When installing the aluminum skin, the surface is flat and vertical, the corners should be prefabricated aluminum skin, and should be closely overlapped, correctly handle the top and inner and outer corners of the curtain wall to prevent water leakage.
4. The insulating material and density should meet the design requirements, and should be full without leaving a gap.
5. During the glue injection process of aluminum skin, the glue injection part should be clean to prevent the glue from being too large or being contaminated by dust.

0
Views: 42