What is the roller painting technique


What is the roller painting technique Before rolling, y […]

What is the roller painting technique

Before rolling, you need to soak it in water and soak it softly. It's a bit like a mop. The mop will not be used for a long time, and it will dry like a rag, or even lump together. As long as it is soaked in water, it can be in a short time It can be restored as before, and it can also clean off the discarded scum. If these scum is stained on the wall with the paint, it will be more troublesome to pick it out after the paint dries. Of course, the drum should not be too wet after soaking in water, otherwise it will affect the initial work of the paint. After the soaking is soft, it should be rolled three times on dry newspaper to ensure that most of the water stains on it are removed.

When the decorative materials is painted, it cannot be directly immersed in the paint bucket, which will lead to waste of paint materials, and secondly, it may not be able to be put in horizontally. After all, the diameter of the paint bucket itself is not large. , It is likely to have a size conflict with it. If you want to dip it, the best way is to use the roller pallet material. Its shape is a bit like a dustpan, which can match the wide side size of the silver roller. After putting the paint in, you can start the rolling and dip, back and forth After a few strokes, the paint coating can be evenly distributed in the roll.

When painting, the application sequence of the roller is from top to bottom, and then from bottom to top, in a "V" or "W" path, and the process of painting the paint should be even, and do not repeat rolling on one place. Several times, otherwise it may cause uneven distribution of the paint layer, and after brushing, you need to use a brush to perform a certain light repair, brush off some liquid beads, and leave a protruding watermark after the edge is dry. The other half of the painting needs to be brushed twice. The first time you can add water appropriately to dilute the base layer. In other words, you can practice your hands. The second layer can not be mixed with water. This kind of paint is thicker and you need to be careful when applying it. a little.

After painting, post-processing is needed. The later stage is mainly to clean up some simple tasks. Soak the roller in water and place it in a cool place to dry. If the paint is not used, it can be processed, and do not put it. Indoors, because of the presence of formaldehyde inside, it may increase indoor air pollution.
Roller wall painting techniques

Views: 66