news

Thickness and specifications of aluminum-plastic panels

Update:13-07-2021
Summary:

Aluminum-plastic panels for building curtain walls. The […]

Aluminum-plastic panels for building curtain walls. The minimum thickness of the upper and lower aluminum plates shall not be less than 0.50mm, and the total thickness shall not be less than 4mm. The aluminum material should meet the requirements of GB/T3880. Generally, 3000 and 5000 series aluminum alloy plates should be used, and the coating should be fluorocarbon resin coating. 2. Aluminum-plastic panels for exterior wall decoration and advertising. The upper and lower aluminum plates are made of anti-rust aluminum with a thickness of not less than 0.20mm

The total thickness should not be less than 4mm. The coating generally adopts fluorocarbon coating or polyester coating. 3. Aluminum-plastic panels for indoor use. The upper and lower aluminum plates generally use aluminum plates with a thickness of 0.20mm and a minimum thickness of not less than 0.10mm. The total thickness is generally 3mm. Coating adopts polyester coating or acrylic coating

Aluminum composite panel is a good material that is easy to process and shape. It is an excellent product for the pursuit of efficiency and time. It can shorten the construction period and reduce the cost. Aluminum-plastic panels can be cut, cut, slotted, band sawed, drilled, processed countersunk, cold-formed, cold-folded, cold-rolled, riveted, screwed or glued, etc.

0
Views: 19